Structural acrylic adhesives
PARTITE 9326
General purpose structural adhesive. Ideal for fast fixturing. Excellent adhesion to wide variety of surfaces.
Request current TDS
PARTITE FAMILY SHOWN / PACKAGING VARIES BY GRADEPARTITE / Structural acrylic adhesives
PARTITE 9330
High performance adhesive with excellent adhesion to ferrite, metals, ceramics, etc.
Request current TDSMethacrylate adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for PARTITE 9330
Confirm the bonding system required for this grade, including any specified activator or companion product. Review surface preparation, application sequence and fixturing, then validate the joint design and cured assembly under the intended loading and service conditions.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Colour | Amber |
|---|---|
| Viscosity, cps 20 rpm | 67,000 – 82,000 cps |
| Cure Speed | Fixture 5 min Full – 24 hrs |
| Shear Strength (psi) | 3,700 |
| Temperature Range (ºC) | –54 to 135 |
| Activator | 1387 |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include PARTITE 9330 in your application brief and request the current grade-specific documentation.
Request technical dataSAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All PARTITE productsCONTACT PARSON
Make the next
connection.
Tell us how you plan to use PARTITE 9330. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in