Gasketing compounds
SONLOK 3510
Sonlok 3510 is an anaerobic gasket sealant, which develops medium strength in a short time.
Request current TDS
SONLOK FAMILY SHOWN / PACKAGING VARIES BY GRADESONLOK / Gasketing compounds
SONLOK 3504
Instant, low pressure, gap filling
Request current TDSAnaerobic adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for SONLOK 3504
Review the flange material, rigidity, surface condition and actual joint gap before choosing a gasket compound. Confirm the bead pattern, assembly sequence and cure conditions, and establish when the joint may be tested or exposed to the operating fluid and pressure.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Color | Orange |
|---|---|
| Cure State | Rigid |
| Viscosity, cps | 500,000/ 1,200,000 Thixotropic |
| Cure Speed | Unprimed- 4 to 24 hrs. Primed- 30 min to 4 hrs. |
| Temperature Range °F | -65 to 300 |
| Packing | 50 ml 250 ml 300 ml 10 liter |
| Gap Fill | Unprimed – 0.030” Primed – 0.050” |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include SONLOK 3504 in your application brief and request the current grade-specific documentation.
Request technical dataSAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All SONLOK products
Gasketing compounds
SONLOK 3518
SONLOK 3518 is an anaerobic gasket sealant, which develops medium strength in a short time.
Request current TDSCONTACT PARSON
Make the next
connection.
Tell us how you plan to use SONLOK 3504. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in