ORIGINAL PRODUCT PHOTOGRAPHSONLOK / Thread sealants
SONLOK 3542
SONLOK 3542 is a high performance anaerobic thread sealant designed for the locking and sealing of metal threaded pipes and fittings.
Full application description
SONLOK 3542 is a high performance anaerobic thread sealant designed for the locking and sealing of metal threaded pipes and fittings. The product cures rapidly in the absence of air between close fitting metal surfaces and provide low-pressure resistance immediately after application. SONLOK 3542 is ideal to seal against gases, water, LPG, hydrocarbons, oils and other chemicals. Excellent thixotropic property prevents migration of the sealant before or during curing.
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for SONLOK 3542
Identify the thread form, fitting materials and the fluid or gas in the system. Confirm surface preparation, assembly procedure and the cure required before testing; check the current technical data for the proposed service conditions and any application-specific requirements.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Viscosity, CPS | 525/1,850 Thixotropic |
|---|---|
| Color | Brown |
| Sp. Gravity | 1.06 |
| Seal to operating Pressure | Seals operating pressures to 10,000 psi |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include SONLOK 3542 in your application brief and request the current grade-specific documentation.
Request technical data03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All SONLOK products
CONTACT PARSON
Make the next
connection.
Tell us how you plan to use SONLOK 3542. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in